Overview
7
Waltron User Manual
9092 Chlorine Analyzer
1
OVERVIEW
1.1
SPECIFICATIONS
1.1.1
PERFORMANCE
Application:
Online measurement of free chlorine
Measuring Range:
0-1000 ug/L, 0-10mg/L
Accuracy:
+/- 3% of reading
Response Time:
T90 = 30 sec
Power Supply:
100VAC - 240 VAC, 50/60 Hz
Mounting:
Wall or Panel Mount
Degree of Protection:
IP54
Dimensions:
33.5 x 8.25 x 6
” (850 x 209 x 151 mm)
1.1.2
OPERATING CONDITIONS
Ambient Temperature:
32
– 140° F (0 – 60 °C)
Sample Medium:
Liquid
Sample Temperature:
32
– 131° F (0 – 55 °C)
Sample Flow Rate:
.013 - .079 GPM (3-18L/h)
Sample Pressure:
Maximum of 145 psig (10 bar)
Outlet Sample Pressure:
Atmosphere
Sample Conductivity
>10uS/cm (salt cell required if conductivity is less)
Sample Connections:
Swagelok® tube diameter = 6mm
1.1.3
COMMUNICATIONS & SIGNAL OUTPUTS
Analog Outputs:
0-20mA, 4-20mA (shunt max 500 Ohm)
Serial I/O for Signals:
Serial interface RS232
Alarms:
Flow, calibration, power
Optional:
Additional inputs and outputs available
1.2
SAFETY PRECAUTIONS, INSTRUCTIONS, AND HAZARDS
1.2.1
GENERAL INFORMATION
This manual contains important information which is required for installation, start up and
operation of the Waltron 9092 Chlorine Analyzer. Please read this manual carefully before
installing and placing the analyzer into service!
Pay attention to all caution and danger labels present on the analyzer and all caution and danger
statements written on this manual.
Waltron shall not be liable for errors contained herein and/or for an incorrect use of the