WALTHER PILOT PILOT WA 400, Operating Instructions Manual

Page: 13 / 41

25 24
Contents
Exploded Drawing 2
Declaration of CE-Conformity 25
Replacement parts 26
1 General 30
1.1 Identification of Model Version 30
1.2 Normal Use 30
1.3 Improper Use 31
2 Technical Description 31
3 Safety Warnings 32
3.1 Safety Warting Symbols 32
3.2 Generally Applicable Safety Precautions 32
4 Assembly / Installation 33
4.1 Mounting of Spray Gun 33
4.2 Connection of Input Lines 33
5 Operational Handling 34
5.1 Safety Warnings 34
5.2 Starting/Stopping Requirements 34
5.3 Spray Pattern Test 34
5.4 Spray Pattern Adjustments 35
5.5 Retooling of Spray Gun 36
6 Cleaning 37
6.1 Safety Warnings 37
6.2 Cleaning - Complete 37
6.3 Cleaning - Routine 38
7 Repairs / Replacements 39
7.1 Replacement of defective Needle Seal Packings 39
7.2 Replacement of Nozzles, Needles, Springs and Seals 39
8 Trouble shooting and Corrective Action 40
9 Disposal of Cleaning / Servicing Substances 40
10 Specification Data 41
EC/EU Declaration of Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility that
the product(s) described below conform to the essential safety requirements. This declaration will
be rendered invalid if any changes are made to the equipment without prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Automatic Spray Guns
WA 400 (Standard version) 20 540
WA 410 (Circulation version) 20 541
WA 420 (Low-pressure version) 20 542
WA 430 (Low-pressure and circulation vers.-standard) 20 543
WA 470-K (Adhesive application version) 20 580
WA 471-K (Ad. application version - circulation) 20 581
WA 472-K (Ad. application version - low-pressure) 20 582
WA 473-K (Ad. appl. vers. - low-pressure - circulation) 20 583
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking
II 2 G c T 5
Tech.File,Ref.:
2407
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is prohibited
until such time as the end product has been proved to conform to the provision of the Directives
2006/42/EC.
Wuppertal, the 2nd of November 2016
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
p.p.