6
4) SPECIFICATIONS
ICECUT 100
Maximum hole cutting capacity: 30mm dia. x 35mm deep Arbor
bore = 19.05mm (3/4") dia.
ICECUT 100
Voltage / Frequency
120V 50-60Hz
Normal full load
7 A
850 W
Electro Magnet
0.6A
69W
Size
180mm long 90mm
wide
Holding Force at 20°C with 25mm
minimum plate thickness
The use on any material less than 25mm thick will progressively
reduce the magnetic performance. If possible, substitute
material should be positioned under the magnet and work
piece to equate to a suitable material thickness. If this is not
possible, an alternative secure method of restraining the
machine MUST be used.
10,000N
Total Load ( motor)
919W
Overall Dimensions
Height - maximum extended
41
4
mm
Height - minimum
34
9
mm
Width (including Capstan fitting)
165mm
Length Overall (including Guard)
270mm
Nett Weight
11.68kgs
PRODUCT CODE
39-D 100
Vibration total values (triax vector sum) in accordance with
EN61029-1:
Vibration emission value (a
h
):2.273m/s
2
Uncertainty(K):1.5m/s²
Level of sound pressure in accordance with EN61029-1:
Sound pressure(LpA): 87.9 dB(A)
Acoustic power(LwA): 100.9 dB(A) uncertainty(K)
:
3dB(A)
Ear and eye protection must be worn when operating this machine. Wear gloves to protect hands when operating
the machine.
We declare in our sole responsability:
These MAGNETIC DRILLING UNITS comply with all relevant requirements of the directives and standards of CSA.
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will ground back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE GROUNDED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE WARRANTY
Summary of Contents for ICECUT100
