6
Before Initial Operation
Carry out a visual inspection before each start-up.
Check remote control (1), mains plug (9) and all cables for damage.
Check hose couplings, hoses
1)
and hydraulic torque tools
1)
for damage.
1)
not included in delivery
Hose couplings, hoses
and hydraulic torque tools must be designed for an operating pressure of 700 bar.
Hose couplings, hoses and hydraulic torque tools with lower operating pressures are not permitted to be
connected to the hydraulic device!
Check the entire machine, fluid reservoir, motor, manometer and control box for damage such as
ruptures or leaks.
Have damaged parts replaced by qualified technicians before operation.
Check hose couplings (7, 8) for dirt.
Clean soiled hose couplings before operation.
Check the fluid level; the level must be up to the middle of the oil sight glass (6).
If need be, top up hydraulic fluid.
Set up the hydraulic device on a level, horizontal surface so that it is prevented from falling over or falling
down.
Connect the hydraulic device by means of the threaded couplings with the hoses and with the hydraulic
torque tool: (as per Fig. 3)
Power supply connections: (delivery with earthed pin plug). In the event of modification to the mains
connection, protection against shock must be guaranteed by installing a protective earth system.
Fig. 3
The hydraulic device must not be operated without the hoses and the hydraulic torque tool connected
up!
Connect the hydraulic device to the electricity supply.