GB
26
CHARGING THE BATTERY
The machine contains a lead-acid battery which
must be charged regularly in order to keep
it in good condition.
The machine is supplied with a plug-in charger for this purpose. Proceed as follows to charge
the battery:
1. Check the fuse as described in the ‘Main fuse’ section above.
2. Ensure that all four switches on the machine’s front panel are in the OFF position.
3. Insert the plug-in charger into a household AC socket rated 240 V.
4. Connect the plug-in charger's output plug to the charging socket on the machine’s front
panel.
5. The red charging lamp above the socket lights up together with one or more of the battery
status indicator lamps.
6.
Note: When you charge the machine for the first time, we recommend that you
charge the machine for 48 – 72 hours.
7.
Important:
As the battery reaches its maximum capacity, the red charging lamp and
one or more of the battery status indicators may ‘blink’ or dim slightly. This is normal
and does not indicate a fault.
8. The battery has sufficient charge when either both or one of the green battery status indicators
lights up.
If both or one of the green battery status
indicators lights up; the battery has
sufficient charge but you should only
stop charging the battery when the red
charging lamp (located above the 12 V
DC charging socket) goes out.
This product contains a lead-acid battery.
In order to keep the battery in good condition it is important that you following these
instructions carefully:
1. Charge the battery using the plug-in charger according to the instructions above
as soon as possible after purchasing the machine.
2. Charge the battery using the plug-in charger at least once a month, regardless
of the battery status indicators, even if you do not use the product.
3. Charge the battery immediately after you use the product, each time you use the
product.
4. To prevent the risk of damage this product should be secured an in upright
position when transported in your car’s trunk.
5. Failure to charge the product regularly will invalidate the warranty.
640045_Anleitung_D,GB,SLO:PRINT 14.03.2016 8:34 Uhr Seite 26
Summary of Contents for 640045
