Walter 630355, Original Operating Manual

Page: 40 / 88

40
GB
Check that all contents are included and that all parts are in good condition.
It is recommended only using the machine with the supplied parallel guide. This
not only provides better cutting results but also increases stability and safety.
Assembling the parallel guide
- The parallel guide consists of
4 components. the size of the
workpiece determines how many
components will be required.
- Line up each component exactly
with the next and secure them using
the parallel guide fixing rail (20) and
hex screws (E).
- A part of the rubber lip will be cut
off during the first use. This is
intentional and aligns the lip exactly
with the saw blade resulting in
optimal splinter protection.
20
E
Before using the machine
4
630355_Anleitung_D,GB,FR.indb 40 11.12.15 11:06