8
1.5.5
The warranty does not apply in the case of:
•
Damage caused by electrical overload:
Damage to electrical parts caused by insufficient battery capacity, e.g. insufficient
installed battery capacity and/or insufficient battery charge in relation to the amount
of lift use.
•
Damage caused by hydraulic overload:
Damage to lift parts caused by tampering with the hydraulic system
•
Damage caused by mechanical overload:
Damage to lift parts caused by overloading or external force.
•
Wear parts:
e.g. support wheels, bearings, shafts, worn or damaged paint, warning flags, decals,
batteries, rubber bellows, seals between the Liftgate and vehicle.
•
Service and maintenance related:
Measures of a purely service and maintenance character. Replacing fuses, adjusting
hydraulic pressure, adjusting tilt cylinders, adjusting torque. Hydraulic components con-
taminated by dirty hydraulic oil. Dissonance caused by neglected maintenance (lubrica
-
tion).
•
Incorrect installation:
Damage caused by incorrect installation. Claims for this type of damage must be
submitted to the Liftgate seller or installer, or to the service provider that installed the
spare part.
•
External equipment:
Damage caused by external equipment or materials not approved by WALTCO. For
example, equipment connected to the Liftgate electrical system. Parts that have pre-
viously been repaired without WALTCO approval.
•
Parts that have been disassembled:
For example, motors, cylinders, solenoids, pressure switches, valves and similar parts.
•
Corrosion:
Surface corrosion on standard fasteners or on components with damaged surface treatment.
Important information
