23
NOTICE
Detailed instructions for the following activities can be found in the respective sections of these
operating instructions. When using the unit for the first time, follow the sequence of the follow
-
ing steps to avoid damage to the unit.
WARNING
Please observe the safety instructions in the respective sections for all activities.
5. Quick guide
6. Preparing the unit for use
6.1 Mounting the glowstick on a tripod / the mini tripod
NOTICE
Your glowstick has a ¼ inch thread at both ends and can be mounted on a tripod with the
appropriate mounting screw or the mini tripod (20).
1. Unfold the tripod / mini tripod (20) and place it securely and level.
2.
If necessary, secure the ball head of the tripod by tightening it.
3.
If necessary, hold the mounting screw of the tripod and screw the thread of the glowstick
onto the mounting screw until both are firmly connected and no longer wobble.
4. Check that the tripod is secure and cannot fall over.
6.2 Attach the glowstick with the magnets
The strong magnets in both ends of the glowstick will stick to any magnetic metal surface.
1. Hold the glowstick with both or one magnetic end against the metal surface.
2.
Check that the glowstick actually holds and does not fall off or cause the object to tip or bend.
6.3 Charging the glowstick
The glowstick can be used while it is charging, provided it still has some remaining battery power.
If the battery is low, the brightness will be reduced during charging.
1.
Switch off the glowstick so that you are not dazzled when you switch it on. To do this,
move the on/off switch (7) to the position [OFF].
2. Connect the USB-A plug of the charging cable (19) into the corresponding connection
socket (21) on the underside of the glowstick.
3. Connect the USB-A connector of the charging cable (19) for charging via a suitable adapter
to a protective earthed socket of the local mains supply or directly to a PC or similar with
USB-A connection.
NOTICE
Only use suitable adapters
