36
37
8.6 Connection and operation via DMX control panel with one LED light
• Connect the included 3-PIN DMX control cable (or a compatible DMX cable) with the output
connector of a suitable DMX remote control (not included).
• Connect the other end of the cable with the DMX input socket (3) <DMX IN> of the LED light.
• Make sure you choose the right socket/plug.
• The set DMX channel of the LED light will be shown on the display (9) in the <DMX> field.
• Set the same channel/address on the LED light and the DMX control unit
• The brightness and color temperature setting (Bi Color only) of the LED light is now controlled
by the DMX signal from the DMX console.
8.7 Connection and operation via DMX control panel with several LED light
• Connect the DMX control console, as described in point 8.5 to the device.
• Insert a compatible DMX control cable into the DMX output socket marked <DMX OUT> (2).
• Insert the other end of the cable into the DMX input socket (3) of the second light marked
<DMX IN>.
• Set the correct DMX control channel on the 2nd light.
• Both LED lights are now controlled via the DMX signal of the remote control.
• Proceed in the same way to control other lights.
Light
DMX 512 Console
DMX connection for single light
For more details on DMX address setting, please refer to the table below and the
instructions for controlling a DMX.
DMX adress
on LCD
Corresponding channel
on DMX console
(on single color light)
Corresponding channel
on DMX console
(on bi-color light)
1
1-1 (Brightness)
1-1 (Brightness), 1-2 (Color Temperature)
2
1-2 (Brightness)
1-2 (Brightness), 1-3 (Color Temperature)
…
…
…
16
1-6 (Brightness)
1-16 (Brightness), 2-1 (Color Temperature)
17
2-1 (Brightness)
2-1 (Brightness), 2-2 (Color Temperature)
…
…
…
511
32-15 (Brightness)
32-15 (Brightness), 2-16 (Color Temperature)
512
32-16 (Brightness)
NOTICE
The devices of the Walimex pro Brightlight Fresnel LED series are equipped with 3-pin XLR
DMX connections. If your DMX control unit has a 5-pin DMX connection system, the use of
suitable 5-pin on 3-pin adapters is necessary. These adapters can be purchased separately.
9. Transporting, storing the device
WARNING
Danger of fire caused by hot parts of the equipment. Allow the device to cool down completely.
•
Switch off the device (See „Switching the device on, off).
• Allow the device to cool down completely.
• Unplug the power supply cable from the device.
•
If necessary clean the device (See „Cleaning the device“).
•
Lay the device and all disassembled elements into the original article packaging box and
transport of store as specified in the technical specifications. See technical specifications.
Light 1
Light 2
Light 3
DMX 512 Console
DMX connection for multiple lights
