background image

For Eons, man has thought the sound of thunder to be 
from the heavens above, echoing boastfully over us as 
we stay safe from its greatness. However, legend tells of 
a stoic and indomitable beast residing in the highest 
mountains seen and heard only by the most brash of 
travelers. With gnarled and twisted horns, this creature 
emits a sound thicker than Earth’s crust to command 
attention and warn all who stand in his way. This is Eons.

VOLUME

The “Vol” knob sets the overall output 

volume of the pedal. The “Voltage” and 

“Gain” controls are very interactive with 

the overall output volume of the pedal, 

so there is plenty of volume on tap to 

compensate.

VOLTAGE

POWER STUFF

The “Voltage” knob allows you to adjust the circuit’s 

operating voltage. At its minimum, the main fuzz 

section of the circuit will operate at around 3 

volts, resulting in a “dying battery” sound. At its 

maximum, the main fuzz section of the circuit will 

operate at around 18 volts, resulting in a more open 

and less compressed sound with added bass. 

As you cut the voltage, the pedal will begin to 
produce a starved sound and have a brighter 
frequency response. As you approach noon 
on the “Voltage” control, the pedal will begin 
to have a gating effect. Lower voltages will also 
drastically reduce the output volume of the 
pedal. This knob behaves slightly differently 
across all the different modes.

Got questions or need a repair? Email [email protected] to talk 

with a real live human about your Walrus gear!

This product comes with a limited lifetime warranty.

Click Here

 for more info.

9 volt DC, Center Neg.
100mA min*

*The use of an isolated power supply is 
recommended for powering all Walrus Audio Pedals. 
Daisy chain power supplies are not recommended. 

Reviews: