20
©
2018 WALNUTT. All Rights Reserved.
Ride Environment Requirements
1.
DO NOT use the SPECTRA Silver in severe weather conditions. These include, snow, rain, smog,
heavy wind, hail, lightning, tornadoes or hurricanes.
2.
Always ride at outdoor and open locations that are clear of puddles, rocks and other obstacles,
otherwise you may possibly collide into objects.
3.
When you are connecting the SPECTRA Silver, minimize interference by avoiding areas with high
levels of electromagnetism, including high voltage lines, large scale power transmission stations
or mobile base stations and broadcasting towers.
4.
Motor and built-in battery performance is subjected to environmental factors such as slope and
temperature. Ride ONLY in environment with temperature within -10 ~ 35 ℃
(
14 ~ 95
℉)
.
5.
Be very careful when riding in low temperature (<0 ℃) or in uphill (> 5°), as the motor and built-
in battery performance may be affected.
Ride Limits
All the SPECTRA Silver users should abide by all regulations set forth by government and other
regulatory agencies. As regulations in different regions may vary, we strongly recommend that you
timely consult with local traffic authorities and note the most updated information in our official
website (www.walnutt.com) to ensure the following features are fully updated:
Ride Area
With respect to ride areas, the SPECTRA Silver and the electric scooters or skateboards may be
considered in the same category. Refer to their allowed lanes or areas to ride.
For example, in California, it has been legislated that the electric scooters or skateboards should ride
on the non-motor vehicle lanes.
Ride Speed
For safety reasons, ride speed of the SPECTRA Silver is restricted under appropriate limit by default,
which helps users to ride the SPECTRA Silver safely and legally.
You also need to pay attentions to the speed limits in specific sections set by local traffic regulations.
Pre-ride Checklist
1.
Ensure the SPECTRA Silver is fully charged.
2.
Ensure all the components are functioning normally.
3.
Ensure there is nothing obstructing the wheels.
4.
Ensure there are NO loose parts or rupture in shell.
5.
Ensure the SPECTRA Silver is starting on an open, flat and level area.
6.
Connect to the eBoard Go App and check that there is NO abnormality warning.
