walnut
WARDROBE
Made in Vietnam - r05
Page 6 of 6
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
A
C
D
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 2
mounting brackets
to top of unit using 2
small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to
the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the
anchor. Gently tap the
plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach 2
mounting brackets
to the wall by inserting 2
large screws
through each mounting bracket and into the wall
anchor in the wall.
E) Place the unit so the mounting brackets on the back edge are aligned with the wall brackets.
F) Lace one end of the
wall strap
through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
optional wall mounting assembly
WALL
F