3
INTRODUCTION
EASY spray gun washers are used to wash spray guns and accessories manually.
They are compressed air devices which are easy to use and highly practical; they work at high or low pressure and
consume less than a conventional airbrush.
DESCRIPTION OF THE SPRAY GUN WASHER
It has two parts (see fig. on page 3): the washing chamber (A) and the base (B), as shown schematically in figure 1.
The washing chamber comprises:
1)
Ball cock for the continuous jet of clean solvent
2)
Ball cock for atomized solvent
3)
Ball cock for dirty solvent jet
4)
Chimney; an external hose at the top of the device
5)
Start-up cock; turn and the fume suction nozzle starts up automatically
6)
Hatch; only for EASY/S model
7)
Hose for discharge of continuous jet of clean solvent
8)
Hose for discharge of clean solvent in atomized jet
9)
Hose for discharge of continuous jet of dirty solvent
10)
Hose for suction of continuous jet of clean solvent
11)
Hose for suction of clean solvent in atomized jet
12)
Hose for suction of continuous jet of dirty solvent
13)
Hose for discharge of dirty solvent from the tank
The base (B) is a single unit; low down it has brackets to secure the two solvent bins - dirty (16) and clean (17).
