But Wait...There’s More!
Using the Bluetooth Feature
03
02
Loading and Playing a CD
1. Open the CD door and place a CD in the boombox, label side
facing up.
2. Close the CD door.
3. Slide the Source Switch to CD mode.
4. Press the Play/Pause button to begin playing the loaded disc.
Pairing a Bluetooth Device for the First Time
Note: This unit receives Bluetooth signals. You can connect Bluetooth audio
devices such as smart phones, MP3 players, tablets, computers etc. to this
unit via Bluetooth and stream music. This unit does not send Bluetooth
signals, it only receives Bluetooth signals. Therefore, headphones or
earbuds cannot be connected to this unit via Bluetooth. However, you can
connect headphones or earbuds via 3.5mm headphone jack with an aux
cord.
1. Slide the Source Switch to Bluetooth Mode. The letters “bt”will flash on
the display. When pairing, remain within 3 feet of the unit.
2. If the unit does not automatically begin to pair, press and hold the Pair
button.
3. Using the controls on your Bluetooth device, select the onn. CD Boom
box in your Bluetooth settings to pair.
4. If your device should become unpaired, follow the above steps again.
5. If any pairing issues should occur, unpair the unit on your Bluetooth
device and follow the above steps again.
Playing Audio Wirelessly
• To select, play, pause or skip a track, use the controls on the connected
Bluetooth Device, or press the Pair/Play/Pause or Tun/Skip/Search
buttons.
Programming a CD
1. Press the Stop button to stop a loaded CD.
2. Press the Program button. “01” will blink on the display.
3. Press the Skip/Search buttons to select a track.
4. Press the Program button to add the selected track to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks to play in a
specified order.
6. Press the Stop button to cancel a program.
FM Radio
1. Adjust the position of the FM wire antenna to improve reception.
2. Slide the Source Switch to FM radio mode.
3. Adjust the Tuning dial to tune the radio.
