background image

 

 

 

WARNING    Before  removing  any  sheet  metal  panels,  always  perform  the  Electrical 

LOCKOUT/TAGOUT Procedure. Be sure all circuits are disconnected. Failure to comply 
with this procedure can cause property damage, injury or death. 

 

WARNING    Do  not  operate  this  equipment  without  properly  placing  and  securing  all 

covers  and  access  panels.  Failure  to  comply  with  this  procedure  can  cause  property 
damage, injury or death. 

 

WARNING    Do  not  use  or  store  gasoline  or  other  flammable  vapors  or  liquids  in  the 

vicinity  of  this  or  any  other  appliance.  Failure  to  comply  can  cause  property  damage, 
injury or death. 

 

WARNING    In  the  event  of  a  power  failure,  do  not  attempt  to  operate  this  appliance. 

Failure to comply can cause property damage, injury or death.  

General Safety 

 

WARNING    Desmon  accepts  no  responsibility  for  any  situation  resulting  from  work 

carried  out  in  an  unprofessional  manner,  or  from  the  incorrect  interpretation  or 
application of regulations. 

General Installation 

 

WARNING    Incorrect  installation  or  any  modifications  made  to  the  appliance  may 

damage property or result in injury or death.  

Electrical 

 

WARNING  Electrical connections or any work required on the electrical circuits inside 

the appliance must be performed by certified technicians in compliance with local, state, 
and federal regulations. 

 

WARNING   Make sure all facility electrical connections are in compliance with all local 

and federal electrical code regulations. 

Inspection and Maintenance 

 

WARNING    Appliance  maintenance  must  be  carried  out  by  only  by  suitably  trained 

personnel. 

 

WARNING    Before  any  maintenance  work  is  performed,  the  appliance  must  be 

disconnected  from  the  electrical  supply.  Apply  a  lockout  tag  to  the  electrical  supply 
connection. 

 

WARNING    All  replacement  parts  that  are  not  supplied  by  Desmon  must  be  pre-

approved before installation. 

Repair Work Safety 

 

WARNING  Repair work must only be performed by Desmon’s approved distributors or 

one  of  its  authorized  representatives.  Desmon  accepts  no  responsibility  for  any 
situation resulting from work performed by untrained and/or unauthorized technicians. 

Summary of Contents for GBF-15+ETL-WM


















Reviews: