background image

NOTE: Do not look directly at the light to avoid eye injury.

CARE AND MAINTENANCE

All batteries lose energy from self-discharge over time and more rapidly at higher temperatures.
When the unit is not in use, we recommend that the battery is charged at least every three
months.
Ideal storage temperatures for this unit range between 41°F and 68°F (5°C and 20°C) to
maximize battery life.
Never submerge the unit in water. If the unit gets dirty, gently clean the outer surfaces of the unit
with a soft cloth moistened with a mild solution of water and detergent.
Store the units and accessories in safe and dry place, DO NOT PLACE THE UNIT IN DIRECT
SUNLIGHT IN THE VEHICLE,IT WILL BE DAMAGED IN THE HIGH TEMPERATURE.
There are no user-replaceable parts,periodically inspect the condition of unit, adapters and
wires.Do not use any components that have become worn or broken.

ONE-YEAR LIMITED WARRANTY

Walmart guarantees this product to the original purchaser for a period of ONE YEAR against any
defects in material and workmanship, but shall not cover damage caused by misuse, abuse,
alteration, accident, and failure to follow instructions for care and maintenance for the product.

SPECIFICATION:
Input:

DC 15V, 1A(AC charger)

DC 12V, 2A(Car charger)

Output:

DC 12V 200A

Peak current:400A

Battery Type:

Lithium battery, 3.7V 12000mAH

USB:

DC 5V,2A

This product contains an internal Lithium battery pack for formulated from

environmentally sensitive materials. This product must be disposed of properly with due

care for the environment.

Please return this product to your to your local recycling

station where batteries will be recycled or properly disposed.

Toll-free number: 800-234-3702

Summary of Contents for EverStart









Reviews: