Note: Hub does not recharge the batteries.
Simple Hub Setup
Install the Wally hub in a location that is central to where your Wally
sensors will be located.
• Plug in the power adapter to an outlet and attach the power
connector to the back of the Wally hub
• Optional: Connect your Wally hub to your home router using the
included Ethernet cable or you can connect the Wally hub to your
router wirelessly using the Wally app
• Continue setting up your Wally hub by downloading
the Wally app or going to
my.wallyhome.com
and follow the instructions.
Battery Backup Installation
The Wally hub can remain operational for several hours in the event of a
power loss by installing the 4 AA batteries.
• Remove the bottom cover
• Insert the 4 AA batteries
• Re-insert the bottom cover and snap into place.
Power
Connector
Power
Adapter
Ethernet
Cable
