8
Click the orange “
Connect to WiFi network
” button. On the following two screens
select the home WiFi network you want to connect your Hub to and the password
for this network.
After you click the orange “
Connect
” button, your hub will disconnect from your
computer and attempt to connect to the home WiFi network.
Re-connect your computer to your home WiFi network. If your hub has
successfully connected to your WiFi network, both hub lights will become solid
orange. If this does not happen and the hub lights return to alternately flashing
blue, the hub has not connected to your home WiFi network and you will need to
press the button on the back of your hub and re-attempt the process. If you
continue to be unsuccessful, try some of the tips in the troubleshooting section of
the support page (
http://www.wallyhome.com/support/
) or contact customer
service (
).
After your computer is connected to your home network and both of the hub lights
are solid orange, click the orange “
Continue
”
button to complete installing your
hub.
