Revision 7
13
Product Manual PSH-23
7. Technical Specifications
Table 1. Technical specifications
Weight
25 Kg
Dimensions
420mm (W) x 430mm (H) x 300mm (D)
Water Supply
Water pressure: 1 - 3 Bar (Dynamic) recommended.
Flow rate hand wash: 2LPM
Supply pipe size 15mm copper
Waste connection
40mm (1.5” pipe)
Optional Control Unit Specifications
Power supply
230V AC 50/60Hz 2 Amp single phase
Power rating
Maximum power rating 60W
Weight
1.2 Kg
Dimensions
200mm (W) x 150mm (H) x 80mm (D)
Enclosure IP
Rating
IP53
Regulatory
compliance
Complies with RoHS, LVD 2014/35/EU and EMC
2014/30/EU directives.
8. Use and Maintenance Instructions
The PSH-23 water dispenser has been designed and manufactured from quality
materials. If these instructions are followed, the unit will give reliable efficient service.
The installer must pass these instructions to the customer.
8.1.
Operation
1. The unit is switched ON and OFF by the main isolation switch provided by the
installer and positioned in the maintenance duct adjacent to the electronic control
box. If a fault occurs with the unit then it must be switched OFF until the fault is
repaired by a qualified engineer.
Warning! Unqualified personnel must not remove the cover of the electronic
control box due to the risk of electric shock.
2. To use the basin, press the piezo touch buttons located on the front of the basin
that operate the flow of water. The button switch’s do not have any moving parts
