Wallenstein WXR545PL Operator'S Manual Download Page 34

Page: 34 / 42

Service and Maintenance

WXR545PL

Trailer Wood Splitter

9.4 Hydraulic Oil – Changing

Change the hydraulic oil at 100 hours of operation or

annually.

Use Dexron® III Automatic Transmission Fluid (ATF).

Dexron III does not change thickness with the outside

temperature like hydraulic fluid does, resulting in more

consistent performance and less possibility of damage to

the pump. Dexron VI or Mercon® ATF are also acceptable

substitutions.

CAUTION!

Risk of burns to exposed skin.

Hydraulic oil becomes hot during

operation. Hoses, lines and other

parts become hot as well. Wait for

the oil and components to cool

before starting any maintenance or

inspection work.

W028

•

Hydraulic oil type:

Dexron® III ATF

The hydraulic tank drain plug is located under the

machine. An Allen (hex) wrench is required to remove it.

00208

Fig. 30 –

Hydraulic Tank Drain Plug

Procedure

Place a drain pan of suitable capacity under the drain

plug.

Clean the area around drain and remove the drain

plug.

Allow the oil to fully drain, then flush the tank.

Replace the plug and fill the tank with clean oil.

Dispose of used oil in an environmentally safe

manner.

9.5 Hydraulic Oil Filter – Changing

Change hydraulic oil filter at 100 hours of operation

or annually.

The filter is located on top of the hydraulic oil tank.

Place the machine in a

Safe Condition

. See

page 10

CAUTION!

Risk of burns to exposed skin.

Hydraulic oil becomes hot during

operation. Hoses, lines and other

parts become hot as well. Wait for

the oil and components to cool

before starting any maintenance or

inspection work.

W028

00210

Fig. 31 –

Hydraulic Oil Filter

Summary of Contents for WXR545PL











































Search results

Summary of Contents for WXR545PL

Reviews:

Related manuals for WXR545PL

Brands by name

Popular brands

Wallenstein WXR545PL, Operator'S Manual

Search results

Summary of Contents for WXR545PL

Reviews:

Related manuals for WXR545PL

Brands by name

Popular brands