Wallenstein WX980L, Setup Instructions

Page: 17 / 18

Bolt Torque Specifications
Checking Bolt Torque
The tables shown give correct torque values
for various bolts and capscrews. Tighten all
bolts to the torque values specified in the
table, unless indicated otherwise. Check
tightness of bolts periodically.
IMPORTANT! If replacing hardware, use
fasteners of the same grade.
IMPORTANT! Torque figures indicated in
the table are for non-greased or non-oiled
threads. Do not grease or oil threads
unless indicated otherwise. When using a
thread locker, increase torque values by
5%.
Note: Bolt grades are identified by their
head markings.
Imperial Bolt Torque Specifications
Bolt
Diameter
Torque Value
SAE Gr. 2 SAE Gr. 5 SAE Gr. 8
lbf•ft N•m lbf•ft N•m lbf•ft N•m
1/4" 6 8 9 12 12 17
5/16" 10 13 19 25 27 36
3/8" 20 27 33 45 45 63
7/16" 30 41 53 72 75 100
1/2" 45 61 80 110 115 155
9/16" 60 95 115 155 165 220
5/8" 95 128 160 215 220 305
3/4" 165 225 290 390 400 540
7/8" 170 230 420 570 650 880
1" 225 345 630 850 970 1320
Metric Bolt Torque Specifications
Bolt
Diameter
Torque Value
Gr. 8.8 Gr. 10.9
lbf•ft N•m lbf•ft N•m
M3 0.4 0.5 1.3 1.8
M4 2.2 3 3.3 4.5
M6 7 10 11 15
M8 18 25 26 35
M10 37 50 52 70
M12 66 90 92 125
M16 166 225 229 310
M20 321 435 450 610
M30 1,103 1 495 1,550 2 100
M36 1,917 2 600 2,700 3 675