3
4.. REMOVING FROM STORAGE
When removing from storage and preparing to use, fol-
low this procedure:
1. Clear the area of bystanders, especially small chil-
dren and remove foreign objects from the machine
and work area.
2. Attach the skid steer to the splitter by following the
procedure in Section 4.8.
3. Check
a. All hardware. Tighten as required.
b. All hydraulic lines, fittings and connections.
Tighten as required.
4. Lubricate all grease fittings.
5. Remove grease from cylinder rams.
6. Replace any defective parts.
7. Go through the pre-operation checklist (section 4.4)
before using.
Summary of Contents for WX410
Page 17: ...12 A B Z94036 Z94040 ...
