Wallenstein PTO62, Installation Instructions Manual, Page: 8 / 14

8
PTO62 & PTO72
Step 4
Fill the hydraulic tank and circuit with Dexron® III Automatic
Transmission Fluid (ATF). Dexron VI or Mercon® ATF are also
acceptable substitutions.
Wipe up any spilled oil.
Fig. 7 –
Reservoir Filler Cap
Fig. 8 –
Fill Reservoir with Oil
Step 5
Reverse the tractor up to the backhoe to connect the pump to
the PTO.
WARNING!
Never let anyone stand between the tractor and
the implement during hitching. Too fast of an
approach or the operator’s foot slipping from the
clutch can lead to injury or fatality to the person
standing nearby.
W048
Stop close enough so hydraulic hose slack allows the pump to
be mounted onto the tractor PTO shaft. Set the park brake and
remove the ignition key.
Fig. 9 –
Positioning Tractor
Retract the lock collar and slide the pump over the PTO shaft.
Make sure the collar seats in the groove and locks. Tug on the
pump to ensure the collar has locked.
Fig. 10 –
Pump Collar and Anchor Chain
Attach the anchor chain to a part of the frame to prevent the
pump from turning.
Fig. 11 –
Pump Installed
Wrap up any extra hose length into loops and
secure with plastic tie wraps.