25
The Spreader is shipped from the factory in a partially
dis-assembled configuration to allow for easy shipping.
Refer to this section before assembling if your model/
machine requires assembly.
4�8�1 PTO DRIVELINE (IF EQUIPPED)
1. Clear the area of bystanders, especially small
children.
2. Raise the guard over the input shaft.
3. Check the pictorial on shield and orient the shaft to
attach the non-tractor end to the Spreader.
4. Depress the lock pin on the yoke and slide the yoke
over the Spreader input shaft.
5. Release the lock pin as the yoke slides on the shaft
to allow the pin to lock into position.
6. Pull on the yoke to be sure the lock pin seated in
its groove.
7. Lower the guard to cover the input yoke.
4�8 ASSEMBLY
Yoke Lock
Pin
PTO
Guard
