6.5 Cantilever Cradle
(LXG430S, LXG430R, LXG430RP models)
The LXG430 model grapples have a heavy-duty cantilever log
cradle used for lifting, stacking, and transporting logs. The
serrated edge prevents the log from sliding off the cradle as you
transport or position the log for stacking.
01519
Fig. 18 –
Cantilever Cradle
WARNING!
Be aware of potential collision
hazard from the swing radius of
the log while transporting. Plan the
route ahead of time.
Keep bystanders 20 ft (6 m) away
from the machine.
W090
6.6 Hydraulic Control Selector
The hydraulic control selector box needs to be mounted in a
convenient location inside the cab of the skid steer, so that the
grapple can be easily and safely controlled.
The control requires a 12-volt source and can be connected
through the 12 V adaptor plug into a standard cigar lighter
receptacle. For convenience, the plug comes with a 72"
(182 cm) lead. When mounting the control, make sure the cable
is routed to avoid:
• The operator getting entangled when exiting or entering
the cab
• Being hit or pinched by the machine or material
The main harness features a connector that allows the controller
to be detached from the grapple, allowing the controller to
remain in the cab when the grapple has been removed and
stored.
6.6.1 LXG420R and LXG430R Controls
Z94827
400
Series
01524
Fig. 19 –
LXG420R and LXG430R Hydraulic Control Selector
The hydraulic control selector box provides a way of controlling
the grapple functions from a single hydraulic control in the skid
steer cab. The position of the switch determines which function
is active at the hydraulic control valve.
Push the switch down
to activate the grapple
Open / Close
function.
Controls
LXG400 Series
Log Grapples
28
