Wallenstein FXP Series, Operator'S Manual

Page: 12 / 28

Safety
FXP20, FXP30
Skidding Plate
Safety
12
2.8.2 Safety Sign Explanations
1. Caution!
See the operator's manual. Read ALL
operating instructions in the manual and
learn the meaning of ALL safety signs on
the equipment.
The best safety feature is an informed
operator.
2. Caution!
Be aware of crush hazards from large
moving objects.
3. Warning!
Always wear appropriate personal
protective equipment when using this
equipment. For example:
• A hard hat
• Heavy gloves
• Hearing protection
• Protective shoes with slip
resistant soles
• Protective glasses, goggles or
face shield
IMPORTANT! Safety signs must always be replaced if they
become damaged, are removed, or become illegible.
Safety signs are included in the product decal kit available from
your authorized dealer. Decals are not available separately.
2.9 Replacing Damaged Safety Signs
• Always replace safety signs that are missing or have
become illegible. Replacement safety signs are available
from your authorized distributor, dealer parts department, or
the factory.
• Keep safety signs clean and legible at all times.
• Parts replaced that had a safety decal on them must also
have the safety sign replaced.
Procedure
Installation area must be clean and dry. Make sure the surface is
free of grease or oil. Ambient temperature must be above 50 °F
(10 °C).
Determine exact position before removing the
backing paper on the decal.
1. Peel the decal off the backing sheet.
2. Align the decal with an edge on the machine if possible.
3. Starting on one edge, carefully press the center of the
exposed sticky backing in place, smoothing it out as you
work from one side to the other.
4. Use a squeegee, credit card or similar to smooth it out.
Work from one end of the decal to the other end.
Small air pockets can be pierced with a pin and smoothed out
using the piece of sign backing paper.