8.8.2 Sprocket Bearings – Checking
Check bearings with the sprocket removed from
the winch drum. Noise is a classic sign of a bearing
problem. If any of the following conditions exist, replace
both bearings.
• Vibration or wobble
• Grinding
• Seal failure
8.8.3 Clutch Assembly – Installing
1.
Reassemble the sprocket onto the winch drum
assembly and install the drum retaining plate.
2.
Install the drive chain and tension it correctly. See
Drive Chain Tension – Adjusting on page 33.
3.
Install the drum/frame assembly into the winch
A-frame. Install the three screws on the front side
of the winch securing the drum frame to the main
A-frame.
4.
Install the bolt (4) and locknut (5) on the end of the
drum shaft
00509
4
5
Fig. 45 –
Drum Shaft Bolt
5.
Re-install the cable. See
for
instructions
.
6.
Install the rear cover and the PTO shaft (1, 2).
00510
1
2
Fig. 46 –
Rear Cover and PTO Shaft
7.
Test clutch function before putting the winch back
to work.
Service and Maintenance
FX40
PTO-driven Log Skidding Winch
36
Summary of Contents for FX40
