12. Raising Hopper
CAUTION! Pinch Point Hazard!
Pinch point hazard. When lowering or raising the hopper into
position, be aware of pinch points and keep clear of them to
avoid injury.
13. Battery
CAUTION! Risk of Explosion!
Do not jump start / charge a frozen battery. Frozen batteries
can explode and result in serious injury. Let battery thaw before
charging.
!
0°
3.3 Replacing Damaged Safety Signs
•
Always replace safety signs that are missing or have
become illegible. Replacement safety signs are available
from your authorized distributor, dealer parts department,
or the factory.
•
Always keep safety signs clean and legible.
•
Parts replaced that had a safety decal on them must also
have the safety sign replaced.
Procedure
Installation area must be clean and dry. Make sure the surface is
free of grease or oil. Ambient temperature must be above 50 °F
(10 °C).
NOTE: Determine exact position before removing the
backing paper on the decal.
1.
Peel the decal off the backing sheet.
2.
Align the decal with an edge on the machine if possible.
3.
Starting on one edge, carefully press the center of the
exposed sticky backing in place, smoothing it out as you
work from one side to the other.
4.
Use a squeegee, credit card or something similar to smooth
it out. Work from one end of the decal to the other end.
Small air pockets can be pierced with a pin and smoothed out
using the piece of sign backing paper.
BXMT4224 / BXMT4238
Trailer Chipper-Shredder
Safety
17
Safety Signs
Summary of Contents for BXMT4224
Page 51: ......
Page 52: ...www wallensteinequipment com...
