background image

 Safety

WXR720/L, WXR740/L

Trailer Wood Splitter

Safety

8

2.3  Why is SAFETY important?

Three Big Reasons:

• 

Accidents Disable and Kill

• 

Accidents Cost

• 

Accidents Can Be Avoided

The policy of Wallenstein Equipment Inc. is to produce products 
that are safe and reliable. However, even when using well-
engineered equipment, there is always an element of risk. To 
minimize the risks and promote safety at all times, this section 
of the operator’s manual details a number of safety rules that 
must always be followed and obeyed.

YOU

 are responsible for the SAFE operation and maintenance of 

your Wallenstein Trailer Wood Splitter. 

YOU

 must ensure that you 

and anyone else who is going to use, maintain or work around 
the wood splitter be familiar with the operating and maintenance 
procedures and related

 

safety

 

information contained in this 

manual. This manual provides good safety practices that should 
be followed while using the wood splitter. 

Remember, 

YOU

 are the key to safety. Good safety practices 

not only protect you but also the people around you. Make 
these practices a working part of your safety program. Be 
certain that 

EVERYONE

 using this equipment is familiar with the 

recommended use and maintenance procedures and follows all 
the safety precautions. 

2.4  Safety Rules

• 

Read and understand ALL Safety and 
Operating instructions in the manual and 
follow them. The most important safety 
device on this equipment is a SAFE 
operator. 

• 

Review safety related items annually with all personnel who 
are operating the machine or performing maintenance.

• 

Wear appropriate Personal Protective Equipment (PPE). 
The suggested equipment includes but is not limited to the 
following:

  

-

Hearing Protection

  

-

Protective glasses, goggles or face shield

  

-

Heavy work gloves

  

-

Protective shoes  with slip resistant soles

 

• 

Keep a first-aid kit available for use 
should the need arise and know how to 
use it. 

• 

Read and understand all safety signs located on the 
machine before operating, servicing, adjusting, or cleaning. 
Safety signs are explained on 

page 13.

• 

Inspect and secure all guards before starting.

•  C

heck engine intake and exhaust. Make sure they are clear 

of debris prior to starting the machine.

• 

Have a fire extinguisher available for use should 
the need arise. Know how to use it.

• 

Do not touch hot engine parts, muffler cover, hydraulic 
hoses, engine body, engine oil, and so on during operation 
or if the engine was recently shut off. Contact may cause 
burns.

• 

Never

 

expect a person to use the machine who has not 

read and understood all operation and safety instructions. 
An untrained operator is not qualified and is exposed 
to possible serious injury or death. It is the owner's 
responsibility to make sure to the operator has familiarity 
and understanding of the machine.

• 

Never allow riders during transport.

• 

Do not risk injury or death by ignoring good safety 
practices. 

• 

Think SAFETY! Work SAFELY!

Summary of Contents for 720124













































Reviews: