Operating Instructions
WXR720/L, WXR740/L
Trailer Wood Splitter
28
00188
1
2
3
Fig. 19 –
Choke Lever
1. Choke Lever
2.
Choke OPEN
3.
Choke CLOSED
2.
Move the throttle lever away from the MIN.
position, about 1/3 of the way toward the MAX
position.
00191
1
Fig. 20 –
Engine Throttle
1. Throttle Lever
3.
Turn the engine ignition switch ON.
00187
Fig. 21 –
Ignition Switch
4.
Pull the starter grip out lightly until resistance is
felt, then pull briskly in the direction of the arrow as
shown below. Return the starter grip gently.
00192
Fig. 22 –
Recoil Starter
IMPORTANT! Do not allow the starter grip to
snap back against the engine. Return it gently to
prevent damage to the starter.
5.
Leave the engine operating at low throttle for a few
minutes to allow it to warm up. Gradually push the
choke control lever open (to the left) as the engine
warms.
IMPORTANT! Engine should be warmed up
before putting to work.
6.
Once the engine is warmed, increase the throttle
setting to MAX before beginning.
6.11 Stopping the Engine
1.
Stop loading material onto the splitter bed.
2.
Decrease engine speed to MIN.
3.
Turn the ignition switch OFF.
6.12 Stopping in an Emergency
In an emergency
•
Turn the ignition switch OFF.
•
Correct fault situation before restarting engine and
resuming work.
Summary of Contents for 720123
Page 43: ......
Page 44: ...www wallensteinequipment com...