Controls
BXTR6438
Trailer Wood Chipper
22
4.2 Discharge Chute
The discharge chute is designed with a spring-loaded latch
handle that allows the chute to be positioned 360° then locked
into position with the latch.
1.
Lift the latch handle till the chute lock pin disengages.
2.
Use the latch and grip handles to position the chute as
required.
3.
Release the latch handle and lock the chute into position at
the next nearest lock point.
01560
Fig. 8 –
Adjusting Discharge Chute
4.3 Hood Deflector
The discharge chute is equipped with a hood deflector on the
end of the chute to direct the chips exactly where desired. The
deflector is held in position by a slotted position handle.
1.
Grasp the handle and lift slightly to clear the handle cogs.
2.
Move the deflector with the handle as required.
3.
Lock the deflector into position by lowering the handle into
one of the slots.
01561
Fig. 9 –
Adjusting Hood Deflector
