Foreword
BXC34
Cart Chipper
2
1. Foreword
1.1 Introduction
Congratulations on choosing a Wallenstein
BXC34 Self-feed
Cart Chipper!
These machines are designed and manufactured to chip wood
in a fast and efficient manner for homeowners and landscapers.
•
The feed hopper moves the wood material into the rotor for
chipping.
•
The chipper rotor has two opposing blades that provide
uniform chip size. A twig breaker in the rotor housing
helps to break up smaller material as it moves through the
machine.
•
A powerful HONDA® gas engine provides power to the
rotor through a V-belt clutch / brake drive system. The
BXC drive system is designed to replace the traditional belt
tensioning system. Features include longer belt life, and a
braking clutch that quickly and safely stops the rotor when
the drive is disengaged. The 3" (75 mm) positive, fail safe
brake meets current European and U.S. requirements.
•
Safe, efficient and trouble-free operation of the Wallenstein
chipper is possible if all operators are aware of the safety,
operation, and maintenance information contained within
this manual.
Review all safety, operation and maintenance information
contained in this manual.
Keep this manual handy for reference. Pass it on to new
operators or owners. Call your Wallenstein dealer or the
distributor if you need assistance, information or additional
copies of this manual.
WARNING!
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Always keep this manual with the machine.
W034
Wallenstein Equipment Inc. • © 2020
www.wallensteinequipment.com
