PULSAR
- installation guide
en 11
Outdoors installation: The charging station should
only be installed in covered locations that provide
suŲicient protection from rainwater. Installation in
a garage or carport is recommended, as long as it
fulfills the stated requirements.
PRECAUTIONS
INSTALLATION INSTRUCTIONS
The electrical installation of your wallbox must be performed by a qualified electrician in accordance with the applicable norms and standards. You
must consider the local electrical installation regulations, fire prevention measures and accident prevention regulations as well as
emergency routes at this site.
Please contact an electrician or arrange installation at your premises with your local distributor.
Take special care while selecting the mounting surface, it has to be constructed in order to withstand the weight of your charger and the
mechanical forces associated with the charging process.
The power supply connection must comply with the standards and regulations for cabling and building infrastructure.
The Wallbox device must be connected through a permanent grounded conductor of the power supply system.
Before installing or cleaning your Wallbox ensure that the power supply is turned o and the system has no energy.
Su icient air circulation must be ensured at the mounting site so that the charging station is cooled during operation: Always observe the allowed
operating temperatures of the device.
Do not install the Wallbox charger nearby:
Flammable, explosive or combustible materials.
Chemicals or solvents.
Flood prone areas, water passage areas or humid environments
Gas conductors or vapor outlets.
Accumulators, storage radiators or heat emitting elements.
Areas with direct solar radiation, to avoid overheating and
degradation over time.
