Wallbox Pulsar Plus, User Manual

Page: 33 / 34

33
If you don’t have another Wi-Fi network available, you can create a Wi-Fi network with your mobile
phone data using a Wi-Fi hotspot. Here are the instructions on how to do so with your phone:
Tip: Switching on the hotspot for the first time fills in default settings, like a network name and
password.
Connect your Wallbox to this new Wi-Fi network.
Wi-Fi network disconnections
If the charger has lost its Wi-Fi connection, simply restart your Wallbox charger and it will
automatically reconnect.
Check your Wi-Fi modem as well to make sure it is functioning properly.
iPhone (iOS 12):
1. Settings
2. Mobile Data
3. Personal Hotspot
4. From the charger select the
hotspot you created with your iPhone
Android (Pie):
1. Settings
2. Network & Settings
3. Hotspot & tethering
4. Wi-Fi hotspot
5. Select on
6. From the charger select the
hotspot you created with your
Android phone.
Warning messages
Your power supply is constantly checked by the Wallbox in order to ensure safe operation. If one of
the parameters is outside the correct operating range, the Wallbox will not allow you to charge your
vehicle and will show you a warning message on the screen:
Unavailability of the charging station:
• Turn off the circuit breaker and wait a few seconds before turning it back on
• If this doesn’t work then consult with your installer to make sure that the current selector is not
at position 0, 8 or 9.
No power to the charging station:
• Disconnect the charging cable from the vehicle. Then turn off the circuit breaker, wait 10 seconds, then
turn the circuit breaker back on. Then reconnect the charging cable to the vehicle.