background image

   

 

   

 

 
 

First – a few words of advice and caution: 

1.

 

Please do this job with two people.    Attempting to do it alone, though heroic, could lead to 

product damage or injury because some things can be too heavy for just one person to safely 

handle.    With two people, the job will be much smoother and safer. 

2.

 

Please read and follow the instructions carefully, as it will save time and avoid possible incorrect 

installation of the product. 

3.

 

Please do not over-tighten screws and bolts, as it may lead to “stripping” the threads and make 

the connection weak.    The best rule of thumb is “snug is good”. 

4.

 

If you will be installing your Murphy Bed on a hard surface such as stone, hardwood floor, tile, 

(not carpet), please lay down sufficient padding (such as blankets, comforters, etc.) to protect 

the wood parts of your wallbed from the floor, and vice-versa. 

5.

 

Before you begin your installation, PLEASE take a few minutes to WATCH our helpful assembly 

VIDEO which is available for viewing online at   www.wallbedgallery.com/video 

 
 
 

 
 
 
 

 

D993    Simply Murphy Bed 

Assembly Instructions 

Congratulations and a Big Thank You for your purchase of a Wallbed Gallery Murphy Bed! 

We sincerely appreciate your business! 

1

Summary of Contents for D933

















Reviews: