Heating on
Combustion has begun/is running
Locked for security
The device locks itself
after two unsuccessful starts
Cooldown/Flameout
I
Heating on in High Altitude Mode
I
Overheat
I
Reminder indicating there was a fault
after fault code flashed for 5 min
30 s
www.wallas.com
Reach Out to a Wallas Professional for the Following:
Glow Failure
2 s
2 s
Combustion Air Blower Fault
2 s
Main Blower Fault
2 s
2 s
I
I
I
Low voltage (usually about 15 sec
after initiating start)
I
PANEL LIGHTS
I
UNLOCKING THE UNIT
If the unit has locked itself,
the combustion light (1) and
the heating indicator light (7)
will flash signaling there has
been a failure that should be
investigated and resolved
prior to further use. Lights
will flash for about 5 min.
1) While the lights are still
flashing, switch the main
power off from the battery
(Pull power plug, remove the
fuse, open breakers, or in-line
switch).
2) Wait for 5 sec. and switch
the main power back on.
3) Press Power Button (3) for
more than 3 seconds to shut
down the unit.
4) Restart the unit normally.
See instructional video
to unlock
