WallbedFactory.com
Assembly Instructions
Page 4 of 19
1.800.975.8451
Tube Leg Murphy Beds
Step 2:
PARTS NEEDED:
STUD FINDER, PENCIL, MEASURING TAPE
Use Stud Finder to find and mark location of 2-4* studs along wall across width of Wall Bed.
Placement of marks will depend on bed size/type. Mark studs on wall at the following heights:
Vertical Beds
Horizontal Beds
Twin
84”
Twin
48”
Twin XL
88”
Twin XL
48”
Full
84”
Full
64”
Queen
88”
Queen
68”
King
88”
King
86”
Cal King
92”
Cal King
82”
To locate studs:
1. Slide Stud Finder along wall behind Wall Bed until lights indicate a stud beneath.
2. Draw a line at this point.
3. Slide Stud Finder along wall in opposite direction, toward your line. When light indicates the
other side of same stud, make a second line.
4. Mark an “x” between the 2 lines. This is the middle of the stud.
5. Repeat steps 1-4 until you have identified and
marked 2-4* studs on wall behind Wall Bed.
18” from wall
See chart above to determine how
many inches from floor to mark studs.
*The number of studs in wall behind bed will
vary depending on size of bed: Twin, 2 studs;
Full/Queen, 3 studs; King, 4 studs.
