-7-
7.0 Prepare the aircraft
Install 5.8G antenna
Firstly install 5.8G antenna onto the transmitter,
and tighten with open-end wrench.
Open-end
wrench
Install propellers
Fix the CW propeller( ) onto the CW motor
according to the direction of blue arrow, and fix the
CCW propeller( ) onto the CCW motor according
to the direction of orange arrow.
Tighten the propellers manually and make sure the
propeller is installed in proper way and fastened.
Attention:
Install prop by hand and tighten by holding
the motor with the included wrench.
You can also use the wrench to help remove
broken props in case of a crash.
Open-end
wrench
CW propeller
(
)
CW propeller
(
)
CCW propeller
(
)
CCW propeller
(
)
Front
Front
Battery installation
Put the battery and the Battery anti-slip mat into the
RUNNER 250, balance the gravity, keep the
head and the tail parts aligned, then fasten the battery
with the Velcro strap.
Battery anti-slip mat
Battery
Gravity center adjustment
Grab the RUNNER 250 by the COG line
(center ofgravity). See the illustration for the COG.
Adjust the battery forward-backwards until the quad
balances.
Gravity Center line
Quick Start Guide
