-8-
ELEV/Rudder stick
Throttle stick
Throttle / Rudder stick
ELEV stick
ELEV/Rudder stick
Throttle stick
Throttle / Rudder stick ELEV stick
8.2 Motor Unlock / Lock
Motor Unlock
Motor Lock
After binding the DEVO 7 to the Rodeo 110, Check that all trims are neutral, the throttle stick
is ALL the way Down with the display indicating 0% throttle. Check that ALL switches are in
the UP position.
Gently push the throttle stick down and move the rudder (YAW) stick to the left side and hold
for more than 2 seconds. (on mode 2 radios throttle and rudder is the same stick).
You will see the status red LED light keeps on and buzzer issues a “B B” sound, indicating that
motors are unlocked.
Be very careful at this point, as pushing the thottle up will start the motors.
You can test by pushing the stick up a little, the motors should start.
Lock the motors by moving the throttle stick all the way down and the rudder (YAW) stick all
the way to the right.
The status red LED light turns off and buzzer issues a “B B” sound when the motors are disarmed.
NOTICE:
The motors are LOCKED by default after successful binding.
TEST:
Push the throttle stick up a little, the motors will not start when locked.
MODE 1 (Throttle stick on the right)
MODE 2 (Throttle stick on the left)
MODE 1 (Throttle stick on the right)
MODE 2 (Throttle stick on the left)
Quick Start Guide
