On this interface, you can preview the real-time high-definition video and photos taken by the R400, and dynamically set the parameters
of the aircraft, remote control, gimbal, and battery.
18
03:58:45
2.4G
77%
Connected
Pose Mode
5.30 m
15 m
D
H
H.S
V.S
17.1 m
0.0 m/s
0.0 m/s
P
0.0°
R
0.0°
Y
0.0°
GPS Ready
19
18
17
13
14
16
15
98%
Center Down
7.0 Download and install R400 APP
APP only supports Android phones. Please use Android phones to download and install the APP. Please go to
(
http://
apps.walkera.com/r400) to download and install or scan the QR code below to download and install with a
browser.
R400 APP download
9
Walkera All Rights Reserved
R400
Quick Start Guide
8 .0 APP Interface Instructions
2)Back: Back to last step.
1)Forward Lidar ranging value: real-time display of the distance
between the aircraft and the object/obstacle directly in front of it.
3)Device connection status: Display Aircraft connected or
disconnected.
4)Flight time: Aircraft flight time.
5)The aircraft Mode: Displays aircraft’ s flight mode.
6)Numbers of aircraft satellite:Display the received satellites of
aircraft.
7)Positioning accuracy:Display aircraft positioning accuracy.
8)High-definition image transmission signal strength:Shows
the strength of the video signal transmitted between the
aircraft and the remote control.
11)Aircraft battery level: Real-time display of the current
aircraft battery level.
9)Remote signal strength: Displays the control signal strength
between the remote controller and the aircraft.
10)Remote battery level: Displays the current remaining
battery power of the remote controller in real time.
