H24d
Operating Instructions
43
ADJUSTABLE FOOT RESTS
Some carrier frames are outfitted with adjustable
foot rests. To adjust, rotate the footrests upward
and slide to the desired position. Rotate the foot-
rest down and insert the edge of the footrest into
the nearest notch to lock in position.
Adjustable Footrest
ADJUSTING CUTTING HEIGHT
WARNING
Never adjust cutting height while the mow-
er is moving. Before adjusting cutting
height or servicing, move the Forward
Speed Control (FSC) into the NEUTRAL-
PARK position, engage the parking brake,
and disengage the blade clutch (PTO).
Tractor should not be moving while adjust-
ing cutting height.
Cutting height is adjusted from operator’s seat
using the deck lift pedal to assist in raising the
deck while adjusting the cutting height hitch pin.
1. Disengage PTO and stop tractor.
2. Push down on deck lift pedal until it latches in
the full up (transport) position.
3. Select the desired cutting height by moving
the hitch pin to the location shown on the
cutting height decal.
4. Push down on the lift pedal and lift up on the
cutting height release lever. Slowly release
the pedal while lifting the lever until the deck is
in the selected cutting height position.
Deck Lift Pedal
Cutting Height
Release Lever
Hitch Pin
Height
Adjustment Decal
Cutting Height Adjustment
Push Deck
Lift Pedal
Raise Release
Lever
Lowering Deck to Selected Cutting Height
Transport Position
1. Disengage the PTO.
2. Push down on deck lift pedal until it latches in
the full up (transport) position.
