Operating Instructions
24
CONTROL IDENTIFICATION, LOCATION, AND
FUNCTION
CAUTION
Before operating the mower, become fa-
miliar with the location and function of all
operator controls. Knowing the location,
function, and operation of these controls
is important for safe and efficient opera tion
of the mower.
Ignition Switch
The ignition switch is located on the right front of the
body and is used to start and stop the engine. The
switch has three positions: “O” is the
OFF
position,
RUN
is the position the key returns to after starting,
and “S” is the
START
position. When starting the
engine, turn the key clockwise to the “S” position. Do
not hold the key in the “S” position longer than 10
seconds. If the engine does not start, return the key
to the “O” position for at least 60 seconds before mak-
ing a restart attempt. Prolonged cranking can damage
the starter motor and shorten battery life. Release the
key when the engine starts, and it will return to the
RUN
position. To stop the engine, rotate the key coun-
terclockwise to the “O” position.
OFF
ON
START
Ignition Switch
Operating Controls
Hourmeter
Ignition
Switch
Body
Latch
Blade Clutch
(PTO)
Forward Speed
Control (FSC)
Throttle
Choke
(Not Visible)
Steering
Levers
Parking
Brake
