P.2
General Assembly Guidelines
I
. Ensure that all parts and hardware are available before beginning assembly.
II
.
Follow each step carefully to ensure the proper assembly of this product.
2
1
III
. Two people are recommended for ease in the assembly of this product.
I
V. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
V
I
. A Phillips head screwdriver is required for the assembly of this product.
V
II
. Power tools should not be used to assemble this product.
Ⅸ
. Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door
V
III
. Drill may be needed for securing product to wall.
Copyright
©
2020, by Walker Edison Furniture Co., LLC. All rights reserved.
Summary of Contents for BU60BALWM
