Step 18
P.22
Copyright
©
2020 b
y
Walker Edison Furniture Co., LLC. All rights reserved.
23
V
D
D
Place sticker (D) as per diagram.
Insert the assembled drawer into the unit frame, extend the Ball Bearing Slide Tracks (V)
on the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled
drawers with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the
drawer does not go in smoothly, please take it out and repeat the step. If you need to remove the
drawer, please pull the drawer all the way out,press or lift the plastic release lever and pull out the
drawer and then re-assembled the drawer until it was going in smoothly .
