FEATURES -
BOW
STAINLESS STEEL
BOW EYE
MAST HOLE & DAGGERBOARD
OPENING FOR OPTIONAL SAIL KIT
FOAM FILLED SEATS (MEET COAST
GUARD FLOTATION STANDARDS)
STERN
MOTOR/RUDDER
MOUNTING PLATES
“WHEEL IN KEEL” FOR EASY
MANEUVERING ON LAND
*Hull ID (HIN/CIN):
US - EWV ____________________
REINFORCED,
COMFORTABLE TO
CARRY GUNWALE (WB10 ONLY)
INTEGRATED
CUP HOLDERS (WB10 ONLY)
HOLE FOR BATTERY
CABLES (WB10 ONLY)
STRAP LOCATORS (WB10 ONLY)
OARLOCKS
(SOLD SEPARATELY)
TOUGH, UV STABILIZED
POLYPROPYLENE HULL
HOLE FOR LINE
ATTACHMENT
MAXIMUM CAPACITIES
WEIGHT:
32 kg / 71 lb
57 kg / 126 lb
OVERALL LENGTH (LOA): 251 cm / 8’3“
295 cm / 9’8”
BEAM:
132 cm / 4’4”
145 cm / 4’9”
INSIDE BEAM:
125 cm / 4’1“
135cm / 4’5”
DEPTH:
53 cm / 1’9”
62 cm / 2’
MOTOR SHAFT LENGTH: Short (15”)
Short (15”)
MAX LOAD:
425 lb
449 lb
MAX PERSONS:
2
3
MAX PERSONS WEIGHT:
360 lb
409 lb
MAX ENGINE POWER:
2 hp
3 hp
MAX SPEED** (KNOTS/MPH) 6-8kt / 7-9mph 6-8kt / 7-9mph
MAX LOAD:
170 kg
255 kg
MAX PERSONS:
2
3
MAX PERSONS WEIGHT:
150 kg
225 kg
FULLY LOADED CAFT WEIGHT:
215 kg
335 kg
MAX ENGINE POWER:
1.5 kw
3.6 kw
MAX SPEED** (KNOTS/KPH) 6-8kt / 11-15kph 6-8kt / 11-15kph
MAX SAIL AREA:
4 m
2
5 m
2
*Capacity rating formulas are different for Europe and the United States;
therefore, Maximum Load, Maximum Persons Weight and Maximum HP
are different.
**Maximum speeds are estimates. Actual top speed will vary depending on
type, make and model of motor and load in boat. The Walker Bay 8 and 10
hulls are displacement hulls, not planing hulls.
* HULL ID (HIN/CIN)
LOCATION
SPECIFICATIONS
WALKER BAY 8 (WB 8S) / WALKER BAY 10 (WB 10F)
USA / USCG*
WB 8S
WB 10F
EUROPE / CE / ISO*
WB 8S
WB 10F
MODEL
WB 8S
WB 10F
ONE WAY DRAIN PLUG
?
FAQ?
Can I increase the maximum capacity or stability
of my Walker Bay 8 or 10?
?
FAQ?
Where do I find the
HIN/CIN
on the boat?
Answer:
The Hull Identification Number or Craft Identification
Number can be found on the starboard/right outside of the
transom of your boat.
DESIGN CATEGORY:
D
FAQ?
What
model year
is my boat?
Answer:
The model year is the last two digits of your
HIN/CIN.
Answer:
The Walker Bay 8 and 10 are traditional hull shapes
designed to be able row, motor and sail. You can increase the
maximum load, persons or motor capacity of your Walker Bay 8 or 10
by adding a Rigid Inflatable Dinghy or RID kit to your boat. RID kits can
easily be added to any Walker Bay 8 or 10. The additional flotation of
the RID kit’s inflatable collar increases the displacement, length and
beam of the hull which increases the boat’s stability, load and motor
capacity without compromising rowing or sailing performance.
For information on RID kits go to www.walkerbay.com
SPECIFICATIONS & COMPONENTS SUBJECT TO CHANGE WITHOUT NOTICE.
NON-SKID, DRAINING FLOOR
w. ROWING FOOT REST
(WB10 ONLY)
Page 2
