![Walker Bay Genesis Console 310 Assembling Instructions Download Page 12](http://html1.mh-extra.com/html/walker-bay/genesis-console-310/genesis-console-310_assembling-instructions_3217027012.webp)
12
NOTE
2. Steering Cable:
The steering cable cannot be bent at a sharp angle, or steering performace will be affected,
or the cable could come loose during operation.
We suggest that the black tray between the console and under seat box to be removed, and
the steering cable to be guided down towards the bottom of the seat box. And then it could
come out of the seat box from the lower starboard side via the round opening, and along
below the tube all the way to the motor at the rear.
3. Fuel Tank:
Since the tray in the battery compartment is to be removed because of the steering cable,
you MUST NOT place the fuel tank inside the lower seat box under the console.
According to marine safety regulations, the battery and the fuel tank must be separated.
Walker Bay recommends that the fuel tank to be placed under the rear seat, if you install the
Genesis seat there.
If you are going to install the Deluxe Tender Kit, you will have a similar seat box under the
rear seat, in which the fuel tank can also be placed.
There is a warning lable in the battery compartment showing such a warning (see below).
If this label is missing or worn out, you could order a replacement by calling us at 1-888-44
WALKER. The part number is: ____________.
4. Installing Throttle Control and Outboard Motor:
For Outboard Motor installation instructions, please see owner's manual of the Genesis boats
by Walker Bay Boats.
For throttle controls, there are 2 types that can be installed: fl ush mount, or side mount.
Please follow the installation instructions that come with the throttle control unit that you are
going to use.
Note: If you are installing side lights, please make sure that you position the throttle control
far back enough from the starboard light so the handle, when in full throttle position, will not
interfere with the light.