Walker Ameriphone XL-30, Operating Instructions Manual

Page: 12 / 44

6
Setting up Your XL-30
(continued)
Incoming Voice Volume
You can adjust the volume of
incoming calls by simply sliding
the
VOL control. This gives you up
to 18 dB. more volume. If you
want more amplification, follow
the directions below.
1. Press the
AMPLIFY
button as
shown in Figure 8 to turn the
incoming voice amplifier ON or
OFF. When
AMPLIFY
is on,
the AMPLIFY indicator light
comes on.
2. Adjust the volume in the ear
piece by moving the VOL slide
control in Figure 9. With
AMPLIFY ON incoming
volume will be up to 30dB
louder.
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
Figure 9 - Volume Slide Control
Figure 8 - AMPLIFY Button and Indicator
5.
Angle the phone downward
to feel for the LOWER
protruding nail head. Insert
the WALL JACK'S nail head
into the LOWER part of the
phone's mounting bracket.
6. Once the lower nail head
has been inserted, insert the
UPPER nail head into the
phone's bracket and slide
the phone down until it is
firmly in place on the wall.
7. Once firmly in place, attach
the short line cord to the
phone and attach the
phone's handset.
8. Lift the handset and listen for
a dial tone. The phone is
now ready to use.
Using Your XL-30