3 7
Fig. 5.7 BELT COVERS
5.2
MAINTENANCE
By following a careful service and maintenance program for your machine, you will enjoy many years of trouble-free
service.
5.2.1 BELT TENSION AND ALIGNMENT
Rotational power from the electric motor is transmitted
to the blower through the belt drive. To obtain efficient
transmission of power and good belt life, the belts
must be properly tensioned and the pulleys aligned.
Belts that are too tight will stretch and wear quickly or
overload the bearings on the motor or blower. Belts
that are too loose will not transmit the required power
and will slip, overheat and wear quickly. Pulleys that
are not aligned will result in rapid belt wear.
Follow this procedure when checking and adjusting
belt tension and pulley alignment.
1.
Clear the area of bystanders, especially small
children.
2.
Turn machine off, lock out tag out master control
panel and wait for all moving parts to stop before
starting maintenance work.
3.
Unbolt and remove the belt cover. Lay to the side.
Summary of Contents for ULTRA-VEYOR SYSTEM
