Quarzlight VC-1000Q
02/09
15
7.
Operation of the device
7.1
Adjust tilt angle
1.
Open tilt lever.
2.
Adjust the required tilt angle.
3.
Tighten tilt lever.
7.2
Switch the device on and off
1.
Switch on device:
Set main switch POWER on I.
The switch lights up. The device is ready for operation.
If the lamp is switched on:
The lamp lights up.
2.
Switch off device:
Set main switch POWER on O.
If lamp was switched on:
The lamp will go out.
The lighting of the switch goes out.
7.3
Switch lamp on and off
The lamp can be switched on and off through the five tappet switch.
1.
Switch on device.
See
Switch the device on and off
.
2.
Switch on lamp:
Set the tappet switch LEUCHTMITTEL on I.
The lamp will light up.
3.
Switch off lamp:
Set the tappet switch LEUCHTMITTEL on O.
The lamp will go out.
4.
Adjust output
Adjust the required output by turning the output controller.
