Problem
Possible cause
Solution
Power Station is
switched on, but
shows no function
Micro fuse is
defective
Contact Foto Walser
customer service
Display “Charging”
lights up orange
Display “Protection”
lights up red and a
beep can be heard at
frequent intervals
Power Station is
not or not
sufficiently charged
Charge Power Station
Display “Protection”
lights up red and a
beep can be heard at
frequent intervals
Power Station is
being charged
Start up Power Station only
when it is fully charged. Set
on/off switch to 0 (OFF)
10.
Maintenance of Power Station
10.1.
Continuous inspection and maintenance of Power Station
What you should do
Before each use
Inspect all cables, sockets and plugs for damage. If
damaged:
WARNING!
Danger of electric shock and
danger of fire due to short circuit. Have the Power
Station repaired by an electrician immediately.
X
10.2.
Cleaning the Power Station
WARNING
Danger of electric shock
Please use cleaning supplies exclusively as specified.
Contact between Power Station and moisture or water must be avoided.
Always disconnect Power Station from power supply when cleaning it.
Device component
Cleaning
Casing
Remove light and persistent stains with
microfiber cloth
11.
Accessories and options
You can find extensive accessories for your walimex pro Power Station in our
web shop.
12.
Spare parts
Device component
Item number
walimex Power Cord 4m with IEC Connector
12914
13.
Disposal and environmental protection
Please dispose of your device at your local disposal area at no charge.
13
12
